Boats use a vast range of custom-built marine standards and a few custom-made fasteners. These are used on every aspect of the boat, from windshield fasteners to hatch, deck, anchor clip, and other hard or/and softcover fasteners.
Varying regions of a boat are subjected to distinct types and amounts of environmental exposure, and also different types of impact, motion, and resistance stress necessitating highly specific fasteners for each area.
Fair Wind Fastener, who is a manufacturer of fasteners mostly for marine applications offer you silicon bronze tap bolts used in marine applications.
What are the best materials used for fasteners in boat building?
The following are the few most commonly used materials used for fasteners as far as the marine application is concerned.
- Stainless Steel
Stainless steel, a low-carbon steel alloy with chromium, is widely regarded as the best all-around fastening material for most boats. It is no wonder, given that stainless steel is both strong and corrosion-resistant.
Because the anti-corrosive characteristics of metals are built-in, it will not lose them if it is scratched during use or installation.
It does, but necessitates the presence of oxygen in order to form and retain its protective oxide layer. Screws embedded in boat decks are prone to corrosion beneath the surface of the water for example.
Stainless steel comes in a variety of designed grades, and each with its designation number of its own and set of attributes all at a fair price.
- Silicon Bronze
Mostly silicon bronze is known as bronze, which is an alloy consisting primarily of tin and copper with a minor percentage of silicon. Bronze is a great choice for below-the-waterline applications since it retains its corrosion resistance when there is an absence of oxygen, also is the least ideal metal on your boat.
It is chosen over stainless steel in the construction and re-fastening of wooden boats because of its superior corrosion resistance. Also, it is favored over brass because of its higher strength.
The color of bronze is quite similar to copper and is occasionally used in fine woodworking for its beauty. The primary disadvantage of bronze is its expensive price.
Brass is a corrosion-resistant and electrically conductive alloy made mostly of zinc and copper. Due to its relative softness, its function as a fastener is restricted, and it is consequently largely employed for its aesthetics.
Silicon bronze is probably the most suitable choice for a yacht that is maintained in an ocean slip. It is the best of all the fasteners used in boat construction.
You will have to pre-drill your starter holes because they do not come in deck screw forms, but if you buy Phillips’s head screws, you can drive them in by using any cordless drill.
On any ply-on-frame boat, boat nails made of silicon bronze ring are probably the easiest way to secure the plywood planking to your framing using bronze fasteners. It would be a tough task to drill all of those starting holes in a ply-covered boat.